Industrial and Commercial Vehicles

Industrial and Commercial Vehicles

Ice Resurfacer

Canadian Electric Vehicles has developed a bolt-in system utilizing AC drive and Lithium batteries for conversion of an existing gas or propane ice resurfacer to pure electric power. Converting an ice resurfacer to electric is a smart and economical way to recycle existing ice resurfacers to zero emission vehicles.

We have two models in our Zamboni electric conversion series that work with Zamboni 400 and Zamboni 500 vehicles.

CONVERSION KIT FOR MODELS 520 / 525 / 526

• 50 hp AC Drive System

• 28 kW of Lithium Batteries

• On-board 5 kW Charger

• Recharge time after single cleaning: 1hr from 220 V/30 A

•Capable of 4-6 cleanings before a recharge is needed but recommended to be charged after each use

• J1172 charge inlet – plugs into standard EV charging station

• 30 A 12 V supply to run accessories

• Very little weight change over propane/gas powered resurfacer

• Drives and performs the same as a propane/gas powered resurfacer. The converted resurfacer has regenerative braking which slows the resurfacer down when the throttle is released just like the compression braking of the original engine.

• Very low maintenance

CONVERSION KIT FOR MODEL 446

• 50 hp AC Drive System

• 28 kW of Lithium Batteries

• On-board 5 kW Charger

• Recharge time after single cleaning: 1hr from 220 V/30 A

•Capable of 4-6 cleanings before a recharge is needed but recommended to be charged after each use

• J1172 charge inlet – plugs into standard EV charging station

• 30 A 12 V supply to run accessories

• Very little weight change over propane/gas powered resurfacer

• Drives and performs the same as a propane/gas powered resurfacer. The converted resurfacer has regenerative braking which slows the resurfacer down when the throttle is released just like the compression braking of the original engine.

• Very low maintenance

Electric Bobcat

Canadian Electric Vehicles has converted a number of Bobcats over the years. This 2014 model was converted for a customer in the British Virgin Islands.

e-Carriage for NYC Central Park

Canadian Electric Vehicles provided a complete pre-wired system, custom wiring schematics and technical support.

Three Wheeled Police Vehicle

Canadian Electric Vehicles designed the drive system and built the pre-production prototype.

Testimonials

  • This past week, we unveiled the 2014 Horseless e-Carriage at the NYC International Auto Show. This car, which you helped us build, quite simply, stole the show! I would like to take a moment to thank you for your hard work and contributions.  Our deadlines got tight, moments stressful - but each of you, and the skills and products you represent - helped make this car a reality.

    Jason Wenig The Creative Workshop